Dji spreading wings s900 Manuel d'utilisateur télécharger pdf (Page 6)

Mounting the Landing Gear

Instructions

1. Remove one of the silicone rubber dampers on each of the landing skid tubes. Slide one landing skid

tube into each landing gear leg, then secure the joints with M2.5x8

(socket cap) screws. Re-attach silicone

rubber dampers to each end of the landing skid tubes.

2. Insert the landing gear leg into connection point on the center frame. Afx in place with M3x8 screws.

3. Connect both springs on the legs to the center frame.

4. Note the springs are 58.5mm before connecting to the center frame, and are stretched to 70mm when

mounting is completed.

70mm

Mounting the Landing Gear

M2.5x8 (socket cap)

1 2 3 4 5 6 7 8 9 10 11 ... 31 32

Pas de commentaire

Dji spreading wings s900 Manuel d'utilisateur Page 6